mon nouveau jouet....IH 724
mon nouveau jouet....IH 724
Bonjour a tous, voici mon nouveau jouet arrivé aujourd'hui a la maison et surtout mon nouveau projet restauration...il s'agit d'un IH 724 2 RM avec chargeur, sauvé de la casse, certaines pièces ont été démontés.......GRRRRRR
je n'ai pas encore récupéré la carte grise donc je n'ai pas l'année, mais j'imagine autour de 1970.....
il possède la direction hydrostatique, la boite ampli avec inverseur hydraulique, une cabine TIM a moitié découpé qui va vite disparaitre....pneus arrières 16.9R34, on va remettre la mécanique en état de fonctionnement, l'électricité revue, et peinture complète, en respectant au maximum l'allure et l'équipement d'origine..
il est équipé d'un chargeur HORN DRAULIC LOADER, si quelqu'un a de la doc sur ces chargeur je suis preneur...
je n'ai pas encore récupéré la carte grise donc je n'ai pas l'année, mais j'imagine autour de 1970.....
il possède la direction hydrostatique, la boite ampli avec inverseur hydraulique, une cabine TIM a moitié découpé qui va vite disparaitre....pneus arrières 16.9R34, on va remettre la mécanique en état de fonctionnement, l'électricité revue, et peinture complète, en respectant au maximum l'allure et l'équipement d'origine..
il est équipé d'un chargeur HORN DRAULIC LOADER, si quelqu'un a de la doc sur ces chargeur je suis preneur...
- cornette clément
- Messages : 2767
- Enregistré le : 13 août 2008 18:34
- Localisation : 18 (Cher)
Re: mon nouveau jouet....IH 724
Nickel !
C'est bien assez rare les 724 !
C'est bien assez rare les 724 !
- Carl DEVLIES
- Messages : 1621
- Enregistré le : 30 avr. 2004 23:21
- Localisation : Wevelgem, Belgique
- Contact :
Re: mon nouveau jouet....IH 724
Vu le filtre hydraulique haute pression, construit probablement à partir de 1971. Sûrement assembmé en France, vu les cadrans Jaeger au lieu de VDO pour les tracteurs allemands.
Félicitations; il a l'air d'être assez bon, malgré les pièces qui manquent surtout derrière (relevage).
Félicitations; il a l'air d'être assez bon, malgré les pièces qui manquent surtout derrière (relevage).
On peut faire sortir l'homme de son IH,
mais IH ne sortira jamais de cet homme.
mais IH ne sortira jamais de cet homme.
-
- Messages : 42
- Enregistré le : 13 juil. 2016 11:34
Re: mon nouveau jouet....IH 724
assez rare mais quelques heures de restauration à prévoir, bon courage
- Papounet 82
- Messages : 18162
- Enregistré le : 05 janv. 2006 13:47
-
- Modérateur
- Messages : 10331
- Enregistré le : 20 janv. 2005 20:25
- Localisation : Au pieds des Monts d'Arrée
Re: mon nouveau jouet....IH 724
Avec boite AMPLI....
"Beaucoup de gens vivent de l'agriculteur, bien moins de l'agriculture."
Re: mon nouveau jouet....IH 724
Il me semble avoir un crochet ramasseur ce qui est rarissime pour l époque sur ces modèles
IH chez nous,notre region c'était pas un nid ici ,un poulailler ,une basse cour ,que dis je une forteresse rouge et là le coucou vert vient sortir les œufs rouge un par un ,et case regarde! et meme donne sa benediction, ils refusent le pain beni.
- Jean-François
- Messages : 3408
- Enregistré le : 19 août 2007 20:15
- Localisation : Nord de l'Alsace
- Contact :
Re: mon nouveau jouet....IH 724
Concernant ton chargeur:
http://tractors.wikia.com/wiki/Horn-draulic_loaders
http://tractors.wikia.com/wiki/Steel_Fabrications_Ltd
Steelfab (Cardiff)
Horndraulic badge and Makers plate on a Loader
The Company was formed under the name Steel Fabricators Limited in Birmingham in 1935 to manufacture Pressed and Sheet Metal work. During the 1939 to 1945 period the Company was solely engaged on Government Contracts and the factory occupied an area of 5,000 sq. ft. and there were some 50 employees.
In 1946, to meet expansion plans, the Company relocated to Pengum Road in Cardiff and won large contracts, including the British Iron and Steel Federation Fabricated House and Rigid Form Beams for the Ministry of Works.
In 1949 a licence was negotiated with Horn Brothers, U.S.A., to Manufacture and market agricultural hydraulic loaders and well over 100,000 "Horn-draulic" loaders were sold.
Many hundreds of Scout Diggers were sold, but the Unit did have its limitations and the Shawnee Warrior Digger was designed to supersede the Scout.
In 1952 a subsidiary Company was formed in Australia and this Company had a modern plant on the Moorabbin Industrial Estate near Melbourne, Victoria.
In the early 'fifties' it was decided to go into the Backhoe market, which resulted in the introduction of the Scout Digger, manufactured under licence to the Shawnee Manufacturing Company, U.S.A.
In 1954 a licence was finalized with the Shawnee Company, U.S.A., to manufacture and market Shawnee industrial loaders and diggers and those products form a major part of the Company's range.
In 1958 a licence agreement was made with H.G. Poole Limited to manufacture and market Shawnee Poole Rear Dump Haulers, which enjoyed considerable success throughout the world and were leaders in the articulated dumper field.
In 1959 Steel Fabricators (Cardiff) Ltd., was taken over by the Adamant & Western Group and became a member of the Adwest Group.
Later that year Steelfab carried out a market survey with a view to introducing a Combination Unit as opposed to the Shawnee Warrior type attachment digger. The Steelfab project started in 1960 and the Unit was designed to fall between the JCB 4 and Massey Ferguson.
Several hundred 160/180 combinations units were build but the early models were built on the light weight Fordson Dexta skid unit which was not strong enough to carry the stresses produced by a backhoe loader and units started to fail. This proved futile in the success of the product and although the larger International B2275 skid was introduced as a replacement it was too late for its reputation.
A larger 170/180 model was launched in the late 1960's utilising a much stronger and more powerful Ford 5000 skid but sales were limited and only around 60 units were sold and production ceased in approximately 1972
The Horndraulic '800' Digger was first produced during the latter part of 1965 and received considerable acceptance on the market and a larger Horndraulic '900' was later produced.
The designer of the 800 and 900 digger who had joined Steelfab from Hymac later went on to design a scissor design tipper trailer known as the Power X System and later left Steelfab and set up business building mini excavators known as Powerfab.
http://tractors.wikia.com/wiki/Horn-draulic_loaders
http://tractors.wikia.com/wiki/Steel_Fabrications_Ltd
Steelfab (Cardiff)
Horndraulic badge and Makers plate on a Loader
The Company was formed under the name Steel Fabricators Limited in Birmingham in 1935 to manufacture Pressed and Sheet Metal work. During the 1939 to 1945 period the Company was solely engaged on Government Contracts and the factory occupied an area of 5,000 sq. ft. and there were some 50 employees.
In 1946, to meet expansion plans, the Company relocated to Pengum Road in Cardiff and won large contracts, including the British Iron and Steel Federation Fabricated House and Rigid Form Beams for the Ministry of Works.
In 1949 a licence was negotiated with Horn Brothers, U.S.A., to Manufacture and market agricultural hydraulic loaders and well over 100,000 "Horn-draulic" loaders were sold.
Many hundreds of Scout Diggers were sold, but the Unit did have its limitations and the Shawnee Warrior Digger was designed to supersede the Scout.
In 1952 a subsidiary Company was formed in Australia and this Company had a modern plant on the Moorabbin Industrial Estate near Melbourne, Victoria.
In the early 'fifties' it was decided to go into the Backhoe market, which resulted in the introduction of the Scout Digger, manufactured under licence to the Shawnee Manufacturing Company, U.S.A.
In 1954 a licence was finalized with the Shawnee Company, U.S.A., to manufacture and market Shawnee industrial loaders and diggers and those products form a major part of the Company's range.
In 1958 a licence agreement was made with H.G. Poole Limited to manufacture and market Shawnee Poole Rear Dump Haulers, which enjoyed considerable success throughout the world and were leaders in the articulated dumper field.
In 1959 Steel Fabricators (Cardiff) Ltd., was taken over by the Adamant & Western Group and became a member of the Adwest Group.
Later that year Steelfab carried out a market survey with a view to introducing a Combination Unit as opposed to the Shawnee Warrior type attachment digger. The Steelfab project started in 1960 and the Unit was designed to fall between the JCB 4 and Massey Ferguson.
Several hundred 160/180 combinations units were build but the early models were built on the light weight Fordson Dexta skid unit which was not strong enough to carry the stresses produced by a backhoe loader and units started to fail. This proved futile in the success of the product and although the larger International B2275 skid was introduced as a replacement it was too late for its reputation.
A larger 170/180 model was launched in the late 1960's utilising a much stronger and more powerful Ford 5000 skid but sales were limited and only around 60 units were sold and production ceased in approximately 1972
The Horndraulic '800' Digger was first produced during the latter part of 1965 and received considerable acceptance on the market and a larger Horndraulic '900' was later produced.
The designer of the 800 and 900 digger who had joined Steelfab from Hymac later went on to design a scissor design tipper trailer known as the Power X System and later left Steelfab and set up business building mini excavators known as Powerfab.
http://mc-cormick.skyrock.com/ 195x' Semoir BF /195x' Arracheuse de pdt / 1959' FU 235 D / 1962' F 137 D / 1963' D 326 / 1978' 633 SA /1982' 845XL
TRACBOY67
**Nothing runs like a Deere ... if a Puma is hunting!!!**
TRACBOY67
**Nothing runs like a Deere ... if a Puma is hunting!!!**
- Papounet 82
- Messages : 18162
- Enregistré le : 05 janv. 2006 13:47
Re: mon nouveau jouet....IH 724
Du boulot en perspective mais une belle base de restauration
http://www.vivagri.fr
Ancien propriètaire de 1455S et 1455XL . Reste Cub cadet 1420, Super Cub, IH 756, Steyr 188, Steyr 84 et MF12
Ancien propriètaire de 1455S et 1455XL . Reste Cub cadet 1420, Super Cub, IH 756, Steyr 188, Steyr 84 et MF12
- utility 64
- Messages : 10889
- Enregistré le : 21 oct. 2007 18:19
- Contact :
Re: mon nouveau jouet....IH 724
Apparemment , Bruno tu a trouvé une pièce rare
Dommage qu'ils aient démontés de pièces
Pour l'année , notre ami cornette clément avait posté courant 2012 des anciennes fiches avec les numéros de série suivant les années .
La dernière feuille qu'il a scanné est celle du 724 qui s'arrête en 1969 .
A mon avis , je pense qu'il doit peut être en avoir une autre
Voici ci dessous l'adresse du lien ou il a posté ces documents
viewtopic.php?f=4&t=16697&hilit=numero+serie
Pour le chargeur , je n'ai pas de documentation .
Cela ne m’empêche pas de chercher
J'ai commencé a regarder sur le site Farm Photo pour voir si je te trouve quelque chose .
Peut être à CAUSSADE au mois d'Octobre si j'ai l'occasion d'y tomber dessus
D'ailleurs pour avoir vu cet ensemble fonctionner , je n'avais pas prêté attention que ce tracteur avait ce modèle de chargeur
Dommage qu'ils aient démontés de pièces
Pour l'année , notre ami cornette clément avait posté courant 2012 des anciennes fiches avec les numéros de série suivant les années .
La dernière feuille qu'il a scanné est celle du 724 qui s'arrête en 1969 .
A mon avis , je pense qu'il doit peut être en avoir une autre
Voici ci dessous l'adresse du lien ou il a posté ces documents
viewtopic.php?f=4&t=16697&hilit=numero+serie
Pour le chargeur , je n'ai pas de documentation .
Cela ne m’empêche pas de chercher
J'ai commencé a regarder sur le site Farm Photo pour voir si je te trouve quelque chose .
Peut être à CAUSSADE au mois d'Octobre si j'ai l'occasion d'y tomber dessus
D'ailleurs pour avoir vu cet ensemble fonctionner , je n'avais pas prêté attention que ce tracteur avait ce modèle de chargeur
Modifié en dernier par utility 64 le 22 juil. 2016 19:03, modifié 1 fois.
Re: mon nouveau jouet....IH 724
Au moins les pneus arrières sont bon
Du boulot en perspective mais je vais suivre ça avec intérêt
Du boulot en perspective mais je vais suivre ça avec intérêt
- utility 64
- Messages : 10889
- Enregistré le : 21 oct. 2007 18:19
- Contact :
Re: mon nouveau jouet....IH 724
Je pense que vu comment il a restauré son 745 , le 724 vas suivre le même chemintrax a écrit :Au moins les pneus arrières sont bon
Du boulot en perspective mais je vais suivre ça avec intérêt
D'ailleurs , il nous avait déjà montré des photos de son 724 avant de le ramener chez lui
viewtopic.php?f=4&t=23223&start=75#p340173
Il me semble que notre ami Paul Hoffer connait bien ces tracteurs avec la boite AMPLI
Re: mon nouveau jouet....IH 724
J en ai un 724 direction hydro( ZF ) et boite Meca . Une cabine Buisard , il y a aussi du boulot dessus , mais j ai la gamme 24 ( 624/724/824) mais Qu en 2 rm
. J aime bien ces tracteurs mais le 523 reste un de mes préférés avec les 46
. J aime bien ces tracteurs mais le 523 reste un de mes préférés avec les 46
IH chez nous,notre region c'était pas un nid ici ,un poulailler ,une basse cour ,que dis je une forteresse rouge et là le coucou vert vient sortir les œufs rouge un par un ,et case regarde! et meme donne sa benediction, ils refusent le pain beni.